CSD18534KCS unencrypted SPICE model

Roger Dixon

Just wondering if you could post an unencrypted model for those of us needing to adjust some of the model parameters; e.g. for Monte-Carlo simulations.

Thanks!

Roger Dixon

over 8 years ago

0 Nikhil Gupta (Product Folder Models) over 8 years ago

TI__Mastermind 39210 points

Roger,

We are looking into how best to support this and will get back shortly.

Thanks,

0 Brett Barr1 over 8 years ago

TI__Mastermind 18200 points

Roger,
Do you have an NDA with TI? This information is currently proprietary.

0 Roger Dixon over 8 years ago in reply to Brett Barr1

Prodigy 185 points

Thanks Brett and Nikhil for the replies. No NDA, but fortunately I was able to cover my immediate need with a Vishay part. Still though I probably should resolve this issue for future use. However since I'm a consultant who therefore has an NDA with all of my clients, and they in turn generally have an NDA with TI, do you think it's sufficient that I get the models through my clients? If not I'll contact our local TI rep and set one up.

Thanks,
Roger

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

CSD18534KCS unencrypted SPICE model