CSD19535KTT unencrypted model

PieterT

Other Parts Discussed in Thread: CSD19535KTT, CSD

Good day,

I contacted TI support and they told me to request here, so I'd please like to request the unencrypted model of the CSD19535KTT to run some tests in a different spice platform.

Thanks in advance for any help

Ian

over 7 years ago

0 Britt Brooks - Online Design Tools over 7 years ago

TI__Mastermind 41310 points

Ian,

Apologies for TI Support directing you to the forum for an unencrypted PSpice model request. Typically, we tell our customers to contact their direct TI support staff (if applicable) or to use the online support contacts. In this case, the unencrypted PSpice model for the CSD devices required an NDA to be in place with Ti before the model can be provided. Please see the following FAQ:

Pay particular attention to Item 3 in the Getting the unencrypted model section.

0 PieterT over 7 years ago in reply to Britt Brooks - Online Design Tools

Intellectual 565 points

Thank you Britt, I filled in the request to technical support requesting an NDA for the model.

0 PieterT over 7 years ago in reply to Britt Brooks - Online Design Tools

Intellectual 565 points

Hey Britt,

Just want to check with you. I've contacted them three times requesting an NDA or the unencrypted model and I've been referred here or to the PSPICE model. Is there any other way to obtain the model?

http://imgur.com/a/HBMOf

Thank you for the help

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

CSD19535KTT unencrypted model