This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIDA-01485: typo in pag 6 (cap 2.3.1)

Intellectual 505 points

Replies: 1

Views: 291

Part Number: TIDA-01485

Cap 2.3.1 pag 6  row 10.

There's a typo in ADC voltage input range calculation.

"Considering a 10% headroom for this value, the maximum recommended voltage input to the system is

25.3 × 0.9 = 42.5."

The correct value is NOT 25.3 but 47.3V (that's the result of preceding calculation).

Best regards,

 Michele Santucci

bye by{t}e[s]..TuX!

1 Reply

  • Michele, hello and thank you for your interest in Texas Instruments' TI Designs. The owner for this design has been alerted regarding your findings in our Design Guide for the TIDA-01485 design. Your feedback will be validated and as applicable, the necessary actions taken to correct the error. Thank you for providing us this feedback.

    Best Regards,
    John Fullilove
    Texas Instruments
    TI Designs

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.