PMP9656: Design files

Sam Ting

Intellectual 2710 points

Part Number: PMP9656

Hi sirs,

We're interested in this ref design. Could you please provide the Gerber and CAD files? Thanks!

Best regards,

Sam Ting

over 5 years ago

0 JohnFullilove over 5 years ago

TI__Expert 5120 points

Sam, hello and thank you for you interest in Texas Instruments. Please find the attached odb files for the PMP9565 design. PMP9656_REVB_ODB (2).zip

0 Sam Ting over 5 years ago in reply to JohnFullilove

TI__Intellectual 2710 points

Hi John,

Thanks for your support!

We use Cadence software so we can’t open the odb files.

Could you convert the file to Cadence format or export it to the general Gerber file for PCB manufacturer?

We have two more questions,

What are the differences between A and B versions?
It seems that the pin7/8 and pin10/11 of T1 are connected together from the PCB link, http://www.ti.com/lit/df/tidrbd3/tidrbd3.pdf

But in schematic, only pin7 and pin11 are connected to MOSFETs at secondary side.

Could you help to clarify which one is correct? Thanks!

Best regards,

Sam Ting

0 Brian King over 5 years ago in reply to Sam Ting

TI__Intellectual 2745 points

Hi Sam,

From Rev A to Rev B, R100 was added and the footprint of the transformer was updated. Thanks for catching this. I updated the layout, but forgot to update the documents on the web, which we will do now.

thanks,
Brian

0 Sam Ting over 5 years ago in reply to Brian King

TI__Intellectual 2710 points

Hi Brian,

Thanks!
Could you provide the latest PCB file in Cadence format or export it to the general Gerber file for PCB manufacturer first?
(We use Cadence software so we can’t open the odb files.)

Best regards,
Sam Ting

0 Brian King over 5 years ago in reply to Sam Ting

TI__Intellectual 2745 points

Hi Sam,

Sorry for the slow response. Here are the Gerber files:

PMP9656_REVB_Gerber.zip

thanks,

Brian

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

PMP9656: Design files