TIDA-050014: tps65987D

willing chen

Prodigy 160 points

Part Number: TIDA-050014
Other Parts Discussed in Thread: TPS65987, , TPS65987D

HI team :

I just develop a power board for 24V with the Mac book adapter and tps65987 ,

I found TIDA-050014 should be meet my request .

so can your team send me the jpt file and bin file

Thanks.

over 5 years ago

0 Eric Beljaars over 5 years ago

TI__Mastermind 36751 points

Hi Willing,

You can download the TPS6598x Application Customization tool here:

You can use it to create the project file that best matches your application. We have default templates that may also fit your application well.

If this answers your question, PLEASE select This resolved my issue

Thank you,
Eric

0 willing chen over 5 years ago in reply to Eric Beljaars

Prodigy 160 points

HI Eric . can you send me the default jpt file for TIDA-050014 so I can modified base your version .
for this is my first time touching typeC application. I think your help will be very useful to me

0 Eric Beljaars over 5 years ago in reply to willing chen

TI__Mastermind 36751 points

Hi Willing,

Please see attached.

TIDA-050014.pjt

If this answers your question, PLEASE select This resolved my issue

Thank you,
Eric

0 willing chen over 5 years ago in reply to Eric Beljaars

Prodigy 160 points

HI Eric ,

one more question ,I load your pjt file but cannot save binary ,

it seemed no any firmware yet .

can you Kindly send the bin file directly ?

appreciate !!!

0 Eric Beljaars over 5 years ago in reply to willing chen

TI__Mastermind 36751 points

Hi Willing,

If you download the latest tool from TI.com, the latest low region binary will be inclued.

Thank you,
Eric

0 willing chen over 5 years ago in reply to Eric Beljaars

Prodigy 160 points

HI Eric:

I had used FT4232 to flash the tps65987 and the way as below,

it failed , capture the waveform and spi signal had no data but it appeared in I2C (SCL/SDA)

is there anything wrong in setting ?

0 Eric Beljaars over 5 years ago in reply to willing chen

TI__Mastermind 36751 points

Hi Willing,

Please ensure you connect the barrel jack power to the EVM before connecting the FTDI chip.

Thank you,
Eric

0 Eric Beljaars over 5 years ago in reply to Eric Beljaars

TI__Mastermind 36751 points

Hi Willing,

For your information, the "Power Duo" mode would not be supported with the current ROM version of TPS65987D. The TI-Design was just a proof of concept for this mode. The formal release for "Power Duo" mode will be around beginning of Q2 next year.
Thank you for your understanding.

Eric

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TIDA-050014: tps65987D