Tool/software: Code Composer Studio
Hello Sir, Mam,
My question is about replacing the ARM MCU with TI RF430152H. Is it possible in that case what I should be aware.
Our development and environment is based in NFC rather than BLE and I need to get to work in this direction.
On current I`m working on an algorithm for a medical class Blood pressure using the MCU RF430152H and PPG.
I see that the board TIDA-011580 will be a good test bed to get test results, but our goal is to get the patient monitor arround the above mentioned TI MCU.
I`m very Grateful for the help you could provide me.
Sincerelly yours,
Nestor Ramallo