This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

TINA/Spice/INA188: set the working temperature of the spice models

Intellectual 2270 points

Replies: 1

Views: 297

Part Number: INA188

Tool/software: TINA-TI or Spice Models

Hi,

I am trying to measure the input bias current of INA188 by the TINA-TI software. I want to set the INA188 working in 75℃ environment. Can someone tell me how to set the working temperature of the spice models and what the default temperature of the spice models in TINA-TI software is?

Best Regards,
Amy Luo

  • Hi Amy,

    Please go through the below thread.

    If you want to change temperature (to other than default value) then you can go tab Analysis-->Set Analysis Parameters and at the first row you will see the parameter "Temperature of Environment". Default value is 27 and you can change it.

    Thanks & Regards,

    Saket Gupta

    All TI Spice Models can be found here | All WEBENCH supported devices can be found here

    New to TINA-TI? Its a free spice simulator! Try out this short Video Training Series

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.