This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TIDA-00288
Hello, we are currently in the process of incorporating the TIDA-00288 (TUSB8041) to a few different projects.
Looking at the TIDA-00288 reference schematics pins 33 and 32 on the TUSB8041 (EN_PORT3 & EN_PORT4) are not connected to anything. why is that?
pins 35 and 36 (EN_PORT1 & EN_PORT2) are connected to the TPS2003C, but why are pins 33 and 32 not connected to the two TPS2546?
This is an older design and it looks like they wanted to showcase the battery charging capabilities of the TPS2546 devices on these ports including DCP charging. DCP charging would be enabled when the upstream port is disconnected, under typical conditions the hub would disable the port power control in that case so instead they pulled the enables high to keep the TPS2546 devices on.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.