This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

TIDA-080000: TIDA-080000

Prodigy 10 points

Replies: 1

Views: 28

Part Number: TIDA-080000

I purchased the DLPDLCR3310EVM (TIDA-08000) along with an independent power cord.  The projector is working, but how do I project the image that I want?  I am not super tech savvy, but I have the projector attached to my laptop via the USB connector.  If i have an image on my computer that i want to be projected, how do i actually make that happen? 

  • Hi Branden,

    Welcome to e2e forum and thanks for showing your interest in DLP technology.

    You need an external source to display your video data. This source could be your laptop, PC or Video source generator.

    Now as you mentioned you want to project the data from your computer, please use the HDMI cable to connect in between your computer and DLPDLCR3310EVM HDMI port. It will automatically select the external source and start displaying the data from your computer on the wall.

    Let me know if you see any issue.

    Thanks,

    Navneet 

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.