This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Replies: 1
Views: 83
Part Number: TIDA-00010
Hi Team,
We have a customer who wants to design a pulse oximeter using TIDA-00010 as reference. He has some questions as follows:
1. What can I use for FRAM and is it mandatory?
2. For fingertip pulse oximeter, is motion detector is needed?
Regards,
Danilo
Hello Danilo,
We used the FRAM for sensor data storage. Please check the BOM for the FRAM that was used in the design.
Memory requirement would depend on the customer's application.
Motion artifact could affect the pulseox measurements on the finger though the effect is less pronounced than on the wrist.
Regards
Praveen
TI makes no warranties and assumes no liability for applications assistance or customer product design. You are fully responsible for all design decisions and engineering with regard to your products, including decisions relating to application of TI products. By providing technical information, TI does not intend to offer or provide engineering services or advice concerning your designs.