WEBENCH® Tools/LM5175: LM5175PWPR
Part Number: LM5175
Tool/software: WEBENCH® Design Tools
I am facing some hardware issue. Vin: 26V & Vout: 24V no load condition
Could you please attach the image again. We are not able to see the attachment.
Thanks & Regards,Praveen
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Praveen Badiger:
In reply to Nidhi Rao2:
What issues do you face?
For more information on buck-boost devices have a look at www.ti.com/buckboost
In reply to Brigitte:
My IC is heating up at no load condition and the output voltage is 3-7 V
From the first glance on the schematic, I cannot see anything obviously wrong. It is hard to read the values, so could you please send a higher resolution picture?
Please check if all components are soldered properly and correct, sometimes diodes or electrolytic caps are easily reversed.
I am attaching a PDF of my schematic. test1.pdf
While designing the PCB I was in constant communication using this thread.
Please check the input and output voltage, as well as the inductor current. It is possible that instability in voltage or current causes the excessive heat.
The change in output changes linearly with input
Can you let me know if components values are correct
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.