PMP30338: Proto part supply

Will McDonald

Part Number: PMP30338

Hello, Please can you confirm availability for supply to support feasibility/validation study, and then low volume supply requirement.

Thanks,

Will

over 3 years ago

0 Bernd Geck over 3 years ago

TI__Intellectual 2770 points

Hello Will,

there is a major difference in between EVM and reference design;
EVM's could be ordered, but our reference designs don't.

We're just providing all the CAD and test data to get them rebuilt fast and easy.

Thanks for understanding & best regards, Bernd

0 Will McDonald over 3 years ago in reply to Bernd Geck

Prodigy 20 points

Hi Bernd,

Thanks for your reply, and for my understanding are you able to supply a sample board?

Kind regards,

Will

0 Bernd Geck over 3 years ago in reply to Will McDonald

TI__Intellectual 2770 points

Hello Will,

sorry, we're not able to deliver any hardware;
but using the attached GERBER data you'll get a bare PCB w/in several days;
just forward CAD data to your PCB vendor.

The BoM should be available at Digikey or similar.

Best regards, Bernd

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

PMP30338: Proto part supply