Hi,
This graph was generated using ADS8681 EVM board with our front end circuitry (physical board) connected to the board and captured by the ADC GUI software.
I started off by downloading ADS8681 TINA-TI Ref Design on www.ti.com/.../ADS8681
I constructed the schematics of our front end circuitry and have been trying to replicate this same graph on TINA-TI using transient analysis.
So far, I am unable to obtain any graph on TINA close to the one captured on the ADC GUI software.
Is it possible to replicate the graph above on TINA by simulation?
If possible, please assist on the simulation method on TINA.
Thanks
