Tool/software: WEBENCH® Design Tools
SDA on the LAUNCHXL-CC1352P1 reference design schematic has a pullup (R3) but SCL doesn't. Perhaps R2 was supposed to be connected to SCL ?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software: WEBENCH® Design Tools
SDA on the LAUNCHXL-CC1352P1 reference design schematic has a pullup (R3) but SCL doesn't. Perhaps R2 was supposed to be connected to SCL ?
Hi,
Thanks for letting us know.
It looks like the pull-up is connected to DIO22 instead of DIO21 meaning that you have to change the DIO settings in the example to reflect this