About a tool of TINA-TI, can you assign Spice model to the passive elements such as condensers?
When possible, please tell me the method.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
About a tool of TINA-TI, can you assign Spice model to the passive elements such as condensers?
When possible, please tell me the method.
Hello Minehiko,
Thank you for your inquiry about TINA. Since TINA is a DesignSoft/TINA program, questions are handled by using the DesignSoft support page: http://www.tina.com/technical-support/ .
The DesignSoft/TINA team is very helpful and this is the most direct way for TINA support. Please advise by Reply when the issue has been resolved.
Regards,
~Leonard
The problem about TINA mentioned above was able to be settled.
Thank you for support.