ERROR(ORCAP-15052)

Kuramochi Tadahiko

Guru 28715 points

Hi,

When I ran the simulation, the message appears as below;

What is this error caused by?

I attach simulation files.

Please let me know if you have any questions.

Best Regards,

Kuramochi

0 JC Zhu over 3 years ago

Hi Kuramochi,

These files don't contain the necessary information. Please follow this FAQ to archive the project before uploading:

Thansk,

0 Kuramochi Tadahiko over 3 years ago in reply to JC Zhu

Guru 28715 points

JC-san,

Thank you for your advice, I referred to the link.

I attach the file, again.

Best Regards,

Kuramochi

+1 JC Zhu over 3 years ago in reply to Kuramochi Tadahiko

Tadahiko-san,

it looks you have 2 unconnected pins:

-JC

0 Kuramochi Tadahiko over 3 years ago in reply to JC Zhu

Guru 28715 points

JC-san,

Thank you for your help and sorry for my stupid mistake...

Best Regards,

Kuramochi

0 JC Zhu over 3 years ago in reply to Kuramochi Tadahiko

Kuramochi,

No problem. We've all been there/

The tool actually provides the details as mentioned in the screenshot and you can find them below the schematic:

Regards,

Simulation, hardware & system design tools forum