TIDA-01485: BLDC controller for electric scooter

Vikram Bhujun

Part Number: TIDA-01485
Other Parts Discussed in Thread: TIDA-00774, MSP-FET, MSP430F5132

Hello

It seems both the TIDA-00774 and the TIDA-01485 are suitable for a BLDC motor. My motor operates at 36V and TIDA-00774 operates at 18V.

Please advise which controller will be more suitable for an electric scooter, working on 36V battery?

Thanks

Vikram

over 3 years ago

+1 Felix He over 3 years ago

TI__Prodigy 420 points

Hi Vikram,

Please work with TIDA-01485.

0 Vikram Bhujun over 3 years ago in reply to Felix He

Prodigy 50 points

Thanks Felix.

Where can I get a fully assembled board please? I reckon I will need a pin housing for the controller as it must be programmed, blowed and then mounted on the pcb. Please also advise on programming interface/board for the MSP430F5132IRSBR microcontroller.

Thanks

+1 Felix He over 3 years ago in reply to Vikram Bhujun

TI__Prodigy 420 points

Hi Vikram,

Recommend to make the board in your side, and you can find all the design file (PCB, schematic, BOM and Gerber) as below link:

https://www.ti.com/tool/TIDA-01485

J3 is used for programming, you can connect MSP-FET to program MSP430F5132, refer to below link for MSP-FET:

https://www.ti.com/microcontrollers-mcus-processors/microcontrollers/msp430-micrcontrollers/design-development.html

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TIDA-01485: BLDC controller for electric scooter