TIDA-010062: Inner Layer

May

Part Number: TIDA-010062

Hi,

Customer asking if the inner layer is included in the gerber files (https://www.ti.com/lit/zip/tidcfm1). According to them, they cannot find it as shown in TIDA-010062 PCB (https://www.ti.com/lit/pdf/tidm174)

They want to view the inner layer using gerber viewer.

Thank you in advance.

Regards,
Maynard

0 Desheng, Guo over 2 years ago

Hi, Maynard

Thanks for point out. They are missed in gerber generating progress. I will fix it later.

If you do not mind, you may use Altuim designer generate the gerber by the original PCB file, before it is fixed.

0 May over 2 years ago in reply to Desheng, Guo

Hi Desheng,

Thank you for your response.

Just to confirm, how long it will take to fix the issue?

Thank you in advance.

Regards,
Maynard

0 Desheng, Guo over 2 years ago in reply to May

HI, Maynard

It depends when the web do refresh next time.

If you are hurry, you can send me an email for that.

0 May over 2 years ago in reply to Desheng, Guo

Hi Desheng,

You can send it via my email or here in e2e if possible.

Thank you.

Regards,
Maynard

0 Desheng, Guo over 2 years ago

Simulation, hardware & system design tools forum