TIDA-01414: about F/W for DSP

ACGUY

Guru 11170 points

Part Number: TIDA-01414
Other Parts Discussed in Thread: AUDK2G

Hello E2E,

Our customer has referred to TIDA-01414. They requesting F/W for DSP. Does TI able to provide it?

And,

It can change the input connector to HDMI?

Regards,
ACGUY

over 2 years ago

+1 Ivan Salazar over 2 years ago

TI__Guru* 95145 points

Hi ACGUY,

Regarding HDMI, there is mention of this in section 2.4.1 from TIDA-01414 Design Guide.

I don't see software files included in the Design Files from TIDA-01414 product folder, I would suggest you post a question using EVMK2G or AUDK2G as part number. The responsible team will get your question by doing this. You can mention TIDA-01414 in the body instead of part number.

Best regards,
-Ivan Salazar
Applications Engineer

0 ACGUY over 2 years ago in reply to Ivan Salazar

Guru 11170 points

Hello,

Thank you for reply. Is it okay to post the question in the processor forums?

Regards,

ACGUY

0 Ivan Salazar over 2 years ago in reply to ACGUY

TI__Guru* 95145 points

I think it is, however as long as you use the correct part number it should be assigned accordingly.

Best regards,
-Ivan Salazar
Applications Engineer

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TIDA-01414: about F/W for DSP