• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 41 subscribers
  • Views 207 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIDA-01606: Similar Two-Level Reference Deisgn?

Connor Connaughton
Expert 4460 points
Part Number: TIDA-01606

Hi Team,

I am curious looking at this reference design if you have a similar Two-Level Three Phase design similar to TIDA-01606. Do you offer something like this?

Thanks,

Connor

  • 0
    TI__Intellectual 2110 points

    Hi Connor,

    unfortunately, I do not have in mind any reference design with the same DC bus voltage and input currents (power rating).

    What I can provide you as a general feedback is that a T/Type converter can run also in two-level mode but of course with degraded performances (higher ripple current, higher losses, higher common mode noise, etc.).

    The current software is not able to run in two-level mode.

    Thanks for your attention

    Best Regards

    Riccardo