Other Parts Discussed in Thread: PMP10090
Hi,
Could you please share out to increase the output of PMP10091 reference design to +/-24V ? This means we need Dual Boost with +24V@300mA and -24V@300mA Output ? What components need to change ?
Thanks,
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Do you have the same input voltage range in your system (5V +/- 0.5V)?
Dear Sir, for 12V input you might have a look at PMP10090, an inverting buck boost w/ dual output;
controller got integrated switch, less design effort, works for 12V in and 24V out;
at 300mA you work in the range of max effcy
and line/load regulation of this topology is much better.
R1 to 118k results in +/-24Vout.
Output caps to be replaced by 50V MLCCs.
Voltage stress at semiconductors is Vin + Vout, here 36V, so Schottky might be 60V for better margin.
Depends on product and derating guidelines...
Best regards, Bernd.