Dear Support,
In the TIDA-010054 design guide, on section 2.3.5.7 Thermal Considerations the heat estimation is showed as:
What was the tool used for the Simulation?
Thanks and best regards,
Juan.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dear Support,
In the TIDA-010054 design guide, on section 2.3.5.7 Thermal Considerations the heat estimation is showed as:
What was the tool used for the Simulation?
Thanks and best regards,
Juan.
Hi Juan.
Hope you're doing well!
As stated in the design guide, the simulation was performed with "worse-than-calculated" thermal sim tool. Personally, I haven't used that tool. I need to check with the original designer. Meanwhile, I have PLECS, which incl. thermal sim for power switches.
Rgds
Lei
Hello Lei!!
Nice to talk to you!
Quick question, the worse-than-calculated is a feature also in PLECS?
Just to point the customer to PLECS.
Cheers, Juan.