This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIDEP0032: TIDEP0032

Part Number: TIDEP0032
Other Parts Discussed in Thread: TMDSSK3358, , TMDSICE3359, TMDXICE110


is it possible to adapt the TIDEP0032 application to make it working on AM335x Starter Kit [TMDSSK3358] ? (and not only TMDSICE3359 ICE EVM as the "hardware requirements" section says)

Best Regards

  • Hi Andrea,

    No, with TIDEP0032 cannot be ported to TMDSSK3358 because on this EVM there is no connection between PRU-ICSS and RJ45 Ethernet ports.

    The PRU-ICSS multi-protocol industrial detection firmware needs to receive Ethernet frames via MII instances of PRU-ICSS. The two boards, TMDXICE3359 or TMDXICE110 industrial communication EVMs, support this. The two Ethernet interfaces of TMDSSK3358 are connected to EMAC instance, which is a different IP block inside the AM335x than PRU-ICSS.



  • Ok Thomas, thank you so much!