TIDA-00951: TIDA-00951

Sakthivishnu Rangaswamy

Part Number: TIDA-00951

Hi,

I would like to know if any other supporting design document available for Bi-directional PSFB converter (apart from TIDA-00951).

It will be helpful if the design is discussed in detail. That will help me to cross check with my calculation.

Thanks,

Sakthivishnu

over 2 years ago

0 Desheng, Guo over 2 years ago

TI__Expert 5920 points

Hi Sakthivishnu,

Thanks for interesting our reference design, and post your questions.

But, TIDA-00951 is not bidirectional PSFB, it works push pull for forward, and half bridge for backward.

There is TIDM-02000, which is the only published PSFB reference design in TI.com. You can refer to any documents from this design for your calculation.

0 Sakthivishnu Rangaswamy over 2 years ago in reply to Desheng, Guo

Prodigy 50 points

Hi Desheng,

Thanks for your immediate response.

I am looking at Bi-directional solution. Buck and boost for 2.5kW.

Thanks,

Sakthivishnu

+1 Desheng, Guo over 2 years ago in reply to Sakthivishnu Rangaswamy

TI__Expert 5920 points

Hi Sakthivishnu,

For the bi-directional solution, you can refer to the deisgn of TIDA-BIDIR-400-12, and TIDA-010054.

And, here is an article, talking about the non-isolated bidirectional DC-DC, you can refer this too. www.ti.com/.../slup342.pdf

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TIDA-00951: TIDA-00951