• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 40 subscribers
  • Views 239 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIDA-00601: Shunt Resistor Value

CandanTaskin
Prodigy 80 points
Part Number: TIDA-00601
Other Parts Discussed in Thread: AMC1304M05

Hello TI Team,

We are developing a energy meter over your reference TIDA-00601 Shunt Resistor Design.When we look to Reference Source Code,we can not find a variable or definition for shunt resistor value.

when we use different value shunt resistor, what should we do?

Best Regards,

Candan

  • +1
    TI__Intellectual 2645 points

    Candan,

    Thank you for reaching out. The MSP430-Energy-Measurement software is agnostic of shunt value. The software must be calibrated when first running a system which will correlate the shunt voltage measured by the ADC to the known current applied to the system during calibration. See Section 7 of the TIDA-00601 User Guide.

    It is important when selecting a shunt value to consider the maximum voltage that will be seen across the shunt in your system. The ADC measuring the shunt voltage for current measurements in TIDA-00601 is the AMC1304M05, which has a +/- 50mV input range. You should make sure that the voltage drop across your chosen shunt at the maximum current spec of your e-meter does not exceed this range to ensure maximum accuracy.

    Please let me know if you have any further questions.

    Regards,

    Ben Uhing

  • 0 in reply to Benjamin Uhing
    Prodigy 80 points

    Dear Benjamin,

    Thanks.