Other Parts Discussed in Thread: UNIFLASH, MSP430F5234
hi,
My customer update the fw w/o update the boot code.
Can I know how to use i2c to update the fw with wrong boot code?
BR,
Frank
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
hi,
My customer update the fw w/o update the boot code.
Can I know how to use i2c to update the fw with wrong boot code?
BR,
Frank
Penny,
Due to they already ship the product to customer side, they cannot use JTAG to flash the MSP. So, can I say that they cannot use i2c to program the MSP430F5234, right?
BR,
frank
Frank,
It has been answered through this post:https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools-forum/1098378/tida-050026-23881-reference-code-to-update-the-msp430f5234-fw
Please just post one E2E for single question. Thanks.
Best regards,
Penny