The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIDM-1000: AC input and output issue

Part Number: TIDM-1000

Hi team,

Here's an issue from the customer may need your help:

The AC input in datasheet is 400 VL-L 50 Hz, Output 700-V DC Nominal. Is derating possible like input AC 220VL-L 50 Hz, output DC 400V DC Nominal. And can it be adjusted by modifying the parameters in the program?

Could you help check this case? Thanks.

Best Regards,

Cherry