This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PMP30763: DO160 current harmonic limits

Part Number: PMP30763
Other Parts Discussed in Thread: PMP31179


I went through the application note: and on page 21 it states that for DO160, the harmonic limits are calculated based on the fundamental current at 96Vac but the testing has to be done at 115Vac. In my case, the power supply (PFC designed based on TI CCM PFC Chip) goes down to 90Vac (100-122Vac +/- 10%) at 400Hz. If I will calculate the fundamental based on this limit then I will have plenty of margin at the 115Vac. 

Please confirm if this is the correct interpretation of the standard?