This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Question about TPS62130A SIMPLIS Transient and Average Model TPS62130A SIMPLIS Transient and Average Model

Genius 4155 points
Other Parts Discussed in Thread: TPS62130A

Hi,

I tried to simulate TPS62130A loop response with "TPS62130A SIMPLIS Transient and Average Model TPS62130A SIMPLIS Transient and Average Model" and "SIMPLIS Elements"

I could open "TPS62130A_Loop_Response.sxsch" on it , but I couldn't run new simulation.

(for example, I changed inductor value , then went to "Simulator" tab → Choose Analysis → push "Run" button. but any pop-up window didn7t appear..)

Is there any additional settings I should do for new simulation with this model?

Regards,

Go

  • Hello Go,

    I believe this is due to the SIMPLIS Elements limitation. Stated on their website no more than 100 new topologies are allowed. The model contains 193 new topologies so I don't think this version of SIMPLIS is capable of running the model.

    I can run some specific cases if you'd like.

    Thanks,

    Joseph