Hi Team,
Good day.
One of our customer wants to know if it's possible to add more SiC power MOSFETs and Si IGBTs in the TIDA-01606 by attaching the MOSET's to an external PCB?
Thank you in advance.
Cordially,
Art
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
Good day.
One of our customer wants to know if it's possible to add more SiC power MOSFETs and Si IGBTs in the TIDA-01606 by attaching the MOSET's to an external PCB?
Thank you in advance.
Cordially,
Art
Hi Art,
I am not sure if I have understand correctly, is your customer willing to use like a daughter card approach? In case of a yes, it will be possible to do it but of course the layout will not be optimized.
Furthermore, I would like to mention that if the customer is trying to increase the current capability of the switching components, the inductors and caps on the DC bus need to be modified too.
Thanks for your attention
Best Regards
Riccardo
Thanks Riccardo!
I will inform customer about this and let you know if additional information is needed.
Cordially,
Art
Hi Riccardo,
I sent you a separate email regarding this. Customer sent his schematic and he wants you to have a look if that will work.
Best regards,
Art
Hi Riccardo,
Again thank you for your helping out with the customer's request.
Here is the link to the new forum thread regarding the follow-up inquiry on maximum ambient pressure. Maybe you can help forward to someone who could help?
Thank you!
Art