This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS version 3.3 or 4 or 5 install on windows 10 to connected with MATLAB 2016a

Other Parts Discussed in Thread: TMS320C6416T
Dear All Team,
I have installed the CCS version 3.3 on my desktop with OS windows 10 that the installer has been downloaded from the link Currently, I am trying to connect between the TMS320C6713 DSP board (SN: C6C_1802147) and the desktop, by using the device manager on the desktop it's helpful to check all hardware that it shows the serial communication cable is working properly (attached the screen capture). Then, I tried to upload the MATLAB library file into the TMS320C6713 DSP board by pressing Ctrl+B on the keyboard. Unfortunately, it looks like many error messages appeared. For your information, the MATLAB 2016a can be connected to one of CCS version 3.3 or 4 or 5. I believe the R&D team between Texas Instruments and MATLAB completed the collaboration, so they released CCS v3.3 or 4 or 5 installed first before MATLAB version 2016a.  Please help me to resolve the problem and give me the steps to install CSS correctly and work properly in the Windows 10 operating system. Thank you very much for your help and attention.
Best regards,
Destra ANDIKA, M.Eng