I am designing a RF amplifying circuit whose frequency range is 20MhZ ~ 500Mhz and hope to use TINA to simulate the circuit , as well as not sure whether the TINA can simulate the RF circuit, please advise.
thanks,
John
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I am designing a RF amplifying circuit whose frequency range is 20MhZ ~ 500Mhz and hope to use TINA to simulate the circuit , as well as not sure whether the TINA can simulate the RF circuit, please advise.
thanks,
John
Hello John,
TINA is a DesignSoft/TINA program, therefore questions are handled by using the DesignSoft support page: http://www.tina.com/technical-support/ .
The DesignSoft/TINA team is very helpful and this is the most direct way for TINA support. Please advise by Reply when the issue has been resolved.
Regards,
~Leonard