This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Filter design tool not exporting TINA-TI schematic

Other Parts Discussed in Thread: TINA-TI

The https://webench.ti.com/filter-design-tool/ is not exporting the TINA-TI schematic on valid OP-AMPS. I'm generating some designs, selecting an op-amp model with the Spice Model green checkmark, after selected the Export Design button, it shows an Export In Progress box, and after several minutes waiting it shows Export Failed (SUBMIT ERROR); so here I am.

I used this tool before and was able to export those TINA-TI schematics properly.

I'll look forward for your answer.

Thanks,