PMP8740: CCS project source code

Hello Jeffrey,

I attached as .zip file the CCS project source code. It's open source and has been developed only for prototype verification, therefore is not a final version and must be debugged.

Please consider that all parameters in the software can be set by means of the pushbuttons and display on the charger.

Please consider also that the charging profile of the battery is not implemented.

Best regards,

Roberto

6281.Software Rev_E.zip

Hi Jeffrey,

This code cannot be released because it has been developed for a specific customer. After I delivered my software to the customer, they implemented their own charging profile, therefore owning an intellectual property. If you want to add a charging profile, I suggest to check the application note U-510 of the BQ2031, where few profiles are explained, see for example pages 2,3 and 4 of the SLUA017:

https://www.ti.com/lit/pdf/slua017

Best regards,

Roberto