Other Parts Discussed in Thread: LM5030
I have built the reference bard design TIDA-01352 and I'm looking at the performances using an electronic load.
I cannot reach the performance given in the design guide TIDUCD8.PDF chapter 184.108.40.206.
+LV and -LV output currents are limited to ~1.2A at 50V.
+MID section support >2A at 50V.
I have measured that CS_P1 current sense voltage reach 0.5V at ~1.2A at 50V. Above 1.2A the CS_P1 duty cycle decrease, like if the LM5030 enter a cycle-by-cycle regulation (as intended).
Components parts number, including inductors, has been bought according to the reference design BOM.
Did you get similar feedback about a limited output power capability of the reference design ? Does some component may affect this specification?