This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS63060: Not getting required output in simulation | TPS63060

Part Number: TPS63060
Other Parts Discussed in Thread: TPS631010, TPS63805

Hello Ti Team

I am Chauhan Mihir, and I am working in Aimtron technologies Pvt. Ltd as Hardware design Engineer.

Currently, I am working on a new project, which in design phase only. Our team is thinking to use TPS63060 buck boost IC for getting constant output voltage (3.3V) and input voltage of TPS63060, which are receiving from Li-ION battery where its output voltage range is 3.0V to 4.2V.

I am trying to simulate basic circuitry of TPS63060 IC with two different simulation tools.

  1. Firstly, I am trying with “WEBENCH Power Designer” (Online available on you support website.). However, I am not able to find TPS63060 IC.
  2. I am also trying with “Tina simulator.” I am generated basic supporting circuitry as per IC’s reference circuity. However, I am not getting proper output voltage.

For your reference, images for Tina-simulator software and WEBENCH Power designer are attached. Kindly find it.


Kindly share proper simulator software name -OR- online web-based simulator website link. Therefore, we can finalize circuitry of TPS63060 IC before finalizing hardware of new project.


Chauhan Mihir