TPS61378-Q1: TPS61378-Q1

Himagowri V

Part Number: TPS61378-Q1
Other Parts Discussed in Thread: TINA-TI

Tool/software:

Hi, there is an updation on the above question.

I am able to import the PSPICE model to TINA - TI,

TPS61378-Q1, in the downloadable files, encrypted version is available. PLEASE KINDLY SHARE THE UNENCRYPTED VERSION PSPICE FILE of TPS61378-Q1, i am getting error $CDNENCSTART_ADV2.cLine: #31. Also .tld file is not available, .lib is there, the TINA-TI is warning, equal number of .tld and .lib file should be there. Kindly share the unencrypted .lib file which says TPS61378Trans_Encrypted.lib.

3 months ago

0 Lei Zhong 3 months ago

TI__Genius 12980 points

Hi Himagowri,

Sorry for TPS61378-Q1, only the encrypted PSpice model is available and provided.

We suggest that you may use the PSpice for TI for your simulation.

PSpice for TI can be downloaded from TI official website and it's free.

Regards

Lei

0 Himagowri V 3 months ago in reply to Lei Zhong

Prodigy 40 points

Hi Lei Zhong,

" PSpice for TI " is the one which has encrypted files

I am trying to import the PSpice mode to Tina-TI, due to encryption of the file, i am not able to.

Is there any way you can help me get the unecrypted .lib file of TPS61378-Q1 please ?

Thanks and regards

Himagowri V

+1 Lei Zhong 3 months ago in reply to Himagowri V

TI__Genius 12980 points

Hi Himagowri,

This is a duplicate E2E thread with the one that is closed already.

I just copy the comments below. If no concerns we can close this thread as well.

For TPS61378-Q1 there is no unencrypted PSpice model.

I suggest that you can use the PSpice for TI to run the simulation on the encrypted PSpice model.

Regards

Lei

0 Himagowri V 3 months ago in reply to Lei Zhong

Prodigy 40 points

Sure, please close this thread.

Thank you

Thanks, and regards

Himagowri V

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TPS61378-Q1: TPS61378-Q1