Other Parts Discussed in Thread: PMP
Tool/software:
while the PCB manufacturing PMP 22650
please confirm the design information in the PCB gerber
please check the design information correct or not as shown in the image below .
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Kevin,
Thanks for reaching out, I have looped an engineer who will be able to comment on the accuracy of the information you mentioned.
Best,
Jackson
I would recommend looking at the design rules to find out the limits on trace width and pad size. The FAB notes may not be 100% correct. You'll have to contact the PCB supplier to find out what they can do on board thickness.