PMP22650: PCB design information confirm

Kevin Lee

Prodigy 55 points

Part Number: PMP22650
Other Parts Discussed in Thread: PMP

Tool/software:

while the PCB manufacturing PMP 22650

please confirm the design information in the PCB gerber

please check the design information correct or not as shown in the image below .

1 month ago

0 Jackson Carmichael 29 days ago

TI__Prodigy 630 points

Hi Kevin,

Thanks for reaching out, I have looped an engineer who will be able to comment on the accuracy of the information you mentioned.

Best,

Jackson

0 Brent McDonald 29 days ago in reply to Jackson Carmichael

TI__Intellectual 1325 points

I would recommend looking at the design rules to find out the limits on trace width and pad size. The FAB notes may not be 100% correct. You'll have to contact the PCB supplier to find out what they can do on board thickness.

0 Kevin Lee 27 days ago in reply to Brent McDonald

Prodigy 55 points

thank you so much,

we are making the PCB as your design information.

thanks

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

PMP22650: PCB design information confirm