Tool/software:
To be ablt have YAXIN produce the tranformer YXS61615T, we have to provide them with all the PCBs used in this transformer. We are missing the connection PCBs to be able to proceed with this design. Can you share the data please.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
To be ablt have YAXIN produce the tranformer YXS61615T, we have to provide them with all the PCBs used in this transformer. We are missing the connection PCBs to be able to proceed with this design. Can you share the data please.
There are two copper strips in the transformer. One is soldered on each PCB winding; the other is used to connect all the four PCB windings.
The copper on the PCB winding can be saved, it is just used to improve full load efficiency.
Please see below mechnical drawings.