WEBENCH-POWER-DESIGNER: Simulation, hardware & system design tools forum

Audrey Tuffier

Tool/software:

Hello,

I would like to download the CAD file from the antenna designer, but after one minute the following message appears:
"CAD export was not completed successfully. Please check your connection or retry your inputs to proceed."
I’ve seen in other messages that this issue comes from your servers — do you know when the service will be available again?

1 day ago

0 Sateesh Goudappanavar 1 day ago

TI__Intellectual 2110 points

Hi Audery,

We are already aware of this issue and are experiencing export failures on our end as well.
The matter has been escalated to the concerned team, and they are currently investigating it.
We will keep you informed of any updates or progress as they become available.

Thank you for your patience.

Meanwhile, could you please confirm the device/tool in which you are trying to export?

Best Regards,
Sateesh A G

0 Audrey Tuffier 8 hours ago in reply to Sateesh Goudappanavar

Prodigy 20 points

Thank you, the coil designer working now !

0 Sateesh Goudappanavar 8 hours ago in reply to Audrey Tuffier

TI__Intellectual 2110 points

Hi Audrey,

Thank you for confirming, appreciate your patience and support.

Best Regards,
Sateesh A G