• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 38 subscribers
  • Views 150 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PSPICE-FOR-TI: How to resolce the license error

user4779049
Expert 2355 points
Part Number: PSPICE-FOR-TI


Tool/software:

Hi Team,

 

Please advise me on my question bellow.

When I run the PSICE FOR TI, an error message was reported as bellw.

" Un able to launch Or.CAD PSice TI. A valid license was not found at the<none> license server. ---"

can you advcie me on resolving this probelm.

I have Un-install and Re-install the PSICE FOR TI, but the error did not be resolved.

Mita

  • +1
    TI__Mastermind 37790 points

    Please reboot your PC and try again and create a debug file and share it with us if you still have trouble:

    • Create a new environment variable "CDS_LIC_QA_TEST". Set it to something like C:\Cadence\PSpiceTI\LicLog.txt where you have write permission to.
    • Run PSpice for TI if installed or the installer if not, wait for the error message to be shown, then check if the file C:\Cadence\PSpiceTI\LicLog.txt is created.
    • share the file LicLog.txt
    • Delete the environment variable "CDS_LIC_QA_TEST". (otherwise LicLog.txt will keep growing).

    thanks,

    JC

  • 0 in reply to JC Zhu
    Expert 2355 points

    JC-san,

    Please let me cancel my question.

    Without any my action, I can start the PSPICE FOR TI today.

    Sorry to bother you so much.

    Thank you for your support.

    Mita