LM10506 PSPICE MODEL

Genius 4190 points

Other Parts Discussed in Thread: LM10506, TINA-TI

Hi,

My customer would like to simulate LM10506.

but I couldn't find PSPICE model in Website.

Is there any plan to prepare it? if not, How long will it take to prepare?

Regards,

over 11 years ago

0 Nikhil Gupta (Product Folder Models) over 11 years ago

TI__Mastermind 39210 points

Hi Go,

We do not have the PSpice model for this part, but we do have the TINA-TI model available. TINA-TI is a free simulator that we provide and it is PSpice compatible. It can be downloaded from here: http://www.ti.com/tool/tina-ti. The TINA-TI models will be uploaded to the product folder in a few days.

Best regards,

0 Nikhil Gupta (Product Folder Models) over 11 years ago in reply to Nikhil Gupta (Product Folder Models)

TI__Mastermind 39210 points

Hi Go,

The TINA-TI model for LM10506 has been released to the product folder on the web today. It should show up in 1-2 days. Let me know if you need it earlier.

Best regards,

0 Go over 11 years ago in reply to Nikhil Gupta (Product Folder Models)

Genius 4190 points

Hi, Nikhil,

Thanks for your prompt reply.

I'll recommend that the customer use these models with TINA-TI.

Regards,

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

LM10506 PSPICE MODEL