Error simulating THS3202 Spice model in ADS

Twinkle.

Most of our Spice models are intended to work in Pspice, or Pspice-compatible simulators.

While ADS is officially "Pspice-compatible", experience has shown that some Pspice functions and/or syntax does not work in ADS. Examples are the LIMIT function, and some voltage-controlled switches.

We suspect that is the source of the errors you are seeing. We will look into the error you described and let you know what we find by the end of the week.

A question: which version of ADS are you using?

Regards,

John

Hi John,

I am using ADS 2013. 

I look forward to hear back from you.

Thank you,

Twinkle

Twinkle,

The THS3202 Pspice model contains a LIMIT(x,UL,LL)  function, which ADS does not understand.
It was replaced with an equivalent function which is compatible with ADS.
The modified netlist seems to work fine in a transient sim.

I don't have the most recent version of ADS, so an ADS2009 project with the modified netlist is attached to this thread. 
The netlist - THS3202.net - can be found in the netlists subdirectory of the project.

Please let me know if you have any questions.

Regards,
John