Simple Switcher - No option for steady state simulation with LM26001

Bruce White32

Other Parts Discussed in Thread: LM26001

I'm using the Simple Switcher tool, and it won't give me the option to run a steady-state simulation with a configuration using the LM26001 switcher, only a bode plot. Why is this? Thanks for any help!

over 10 years ago

0 Jonathan Arzadon over 10 years ago

TI__Intellectual 1825 points

Hello,

Thank you for your interest in Texas Instruments' power management solutions. Unfortunately, we do not have a transient SPICE model available at this time for LM26001, which is why you unable to run a steady-state simulation in WEBENCH®.

If you have any other questions or concerns, please let me know.

Best Regards,
Jonathan Arzadon
Applications Engineer
WEBENCH® Design Center
Texas Instruments

0 Bruce White32 over 10 years ago in reply to Jonathan Arzadon

Prodigy 120 points

Thanks Jonathan,

That basically crosses that part off of the list for me then. Any idea if you might have that model available in the future?

0 Jonathan Arzadon over 10 years ago in reply to Bruce White32

TI__Intellectual 1825 points

Hi Bruce,

Sorry, I'm not sure when the transient simulations will be available for this part. We are planning to have it added, but I can't provide you any timelines.

If you need help selecting another part for your design, or if you need any thing else, please let me know.

Regards,
Jonathan Arzadon
Applications Engineer
WEBENCH® Design Center
Texas Instruments

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

Simple Switcher - No option for steady state simulation with LM26001