LP38691-Q1 How to use PSpice Transient Model on TINA-TI

Toshio Ushikubo

Other Parts Discussed in Thread: LP38691, TINA-TI, LP38691-Q1

Hello,

Please advise how to use “LP38691_3P3 PSpice Transient Model” on the following page on TINA-TI, or give me TINA-TI model.

www.ti.com/.../toolssoftware

Best Regards.

over 8 years ago

0 Nikhil Gupta (Product Folder Models) over 8 years ago

TI__Mastermind 39210 points

Ushikubo -san,

We will add this to the TINA-TI Translation queue and get back to you as soon as it is done.

Thanks,

0 Toshio Ushikubo over 8 years ago in reply to Nikhil Gupta (Product Folder Models)

Mastermind 9620 points

Hello Nikhil-san,

Thank you for your cooperation.
Please let me known when you translated to TINA-TI.

Best regards.

0 Nikhil Gupta (Product Folder Models) over 8 years ago in reply to Toshio Ushikubo

TI__Mastermind 39210 points

Hi Ushikubo -san,

We have added this to the translation queue. In the meantime, I have also released the unencrypted model to the web (It should show up in a day or two). You can take it and try importing it into TINA-TI yourself. The procedure can be found here.

Thanks,

0 Toshio Ushikubo over 8 years ago in reply to Nikhil Gupta (Product Folder Models)

Mastermind 9620 points

Hello Nikhil-san,

Thank you for your cooperation.

Best Regards.

0 Toshio Ushikubo over 8 years ago in reply to Toshio Ushikubo

Mastermind 9620 points

Hello Nikhil-san,

I found following model on LP38691-Q1 product page.
-LP38691_3P3 Unencrypted PSpice Transient Model

I need 5V or adjustable output model but it seems 3.3V fixed output model.
Could you give me 5V or adjustable output model?

Best Regards..

0 Nikhil Gupta (Product Folder Models) over 8 years ago in reply to Toshio Ushikubo

TI__Mastermind 39210 points

Ushikubo-san

Please try this.

Thanks,

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

LP38691-Q1 How to use PSpice Transient Model on TINA-TI