Can't load TPS55065-Q1 into TINA-TI to simuate

Adam Duncan25

Other Parts Discussed in Thread: TPS55065-Q1, TINA-TI

I have downloaded the latest version of TINA-TI and the spice model for the TPS55065-Q1 from your website and when I try to add it to the library I get a compile error. I have read the application notes and they don't help for this problem. Please advise on how to get this working.

over 8 years ago

0 Eric Hackett over 8 years ago

TI__Guru 60262 points

Adam,

Your post has been moved to the Simulation Models forum for more appropriate support.

Regards,

0 Nikhil Gupta (Product Folder Models) over 8 years ago in reply to Eric Hackett

TI__Mastermind 39210 points

Adam,

Please refer to the following FAQ. The PSpice model is encrypted and can only be used in PSpice simulator. I will add this internally to the TINA-TI translation queue and get back to you once it is done.

Thanks,

0 Adam Duncan25 over 8 years ago in reply to Nikhil Gupta (Product Folder Models)

Prodigy 20 points

Nikhil,

Thank you for the response. So does this mean that I will be able to use it in TINA-TI? Or are you un-encrypting it so I can use it elsewhere? Not being pushy but, do you have an estimate on how long this process takes (translation queue)? Thanks again for the help.

Respectfully,

Adam

0 Nikhil Gupta (Product Folder Models) over 8 years ago in reply to Adam Duncan25

TI__Mastermind 39210 points

Adam,

No, we will not be unencrypting this model. You will get an encrypted TINA-TI model that will only run in TINA-TI. We currently have many parts in the queue so I have added it to the end for now. We will try to get this to you as soon as possible, but I can not provide an exact date at this time. If you need to increase the priority, please contact your local TI Field Engineer. They will need some more information and we can adjust the priority accordingly.

Thanks,

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

Can't load TPS55065-Q1 into TINA-TI to simuate