OPA830 PS model would not import to TINA-TI

Keiichi Kajino

Expert 2365 points

Other Parts Discussed in Thread: TINA-TI, OPA830

Hi, folks

I have been trying import PS model into TINA-TI model as follows.

www.ti.com/.../slva527.pdf

But I got error when importing. Could you please let me know how to achieve it?

over 8 years ago

0 Britt Brooks - Online Design Tools over 8 years ago

TI__Mastermind 41310 points

Kajino-san,

If you simply remove the PARAMS: statement for subcircuits that do not have parameters (PSpice does not care about this, but TINA-TI does), you should be able to import the model. Please see the attached .lib file. There are 3-4 places where this occurred (Vnoise, Inoise, and diode_ideal).

opa830_3v.lib

I believe that the regular OPA830 is already available in TINA-TI in the product folder. I am assuming that the _3v library is the one that your customer was interested in.

0 Keiichi Kajino over 8 years ago in reply to Britt Brooks - Online Design Tools

Expert 2365 points

Britt,

Thank you for your reply. Also I found TINA_TI model in product folder. (I saw top page only)

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

OPA830 PS model would not import to TINA-TI