Microsip STEP model (e.g. for TPS82674)

marc48123

Prodigy 210 points

Other Parts Discussed in Thread: TPS82674, TPS82084, TPS82740B, TPS82130

I am looking for a 3D model of the TPS82674 (uSIP-N8 package). Do you have any STEP model available?

Best Regards,

Marc

over 8 years ago

0 Gerold Dhanabalan - Online Design Tools over 8 years ago

TI__Genius 14455 points

sip0008a.stp

Hi Marc,

Please use the STEP model attached. We will release the STEP model to the product folder shortly.

Regards,

Gerold

0 marc48123 over 8 years ago in reply to Gerold Dhanabalan - Online Design Tools

Prodigy 210 points

Hi Gerold

Thanks a lot.

Do you by chance also have the model for SIL0008C (TPS82084)?

Regards,

Marc

0 Oliver Landine - WEBENCH® Design Center over 8 years ago in reply to marc48123

TI__Expert 3055 points

Hi Marc,

Please see the attached STEP model.

Regards,

Oliver

4034.SIL0008C.zip

0 marc48123 over 8 years ago in reply to Oliver Landine - WEBENCH® Design Center

Prodigy 210 points

Thank you.

Marc

0 marc48123 over 8 years ago in reply to marc48123

Prodigy 210 points

Hello

Do you also have the model for:
SIP0009F for TPS82740B ?

it would be great, if you would make all of them downloadable from the product pages. Nowadays many people are using STEP models inside PCB designs.

Best Regards,
Marc

0 Oliver Landine - WEBENCH® Design Center over 8 years ago in reply to marc48123

TI__Expert 3055 points

HI Marc,

I agree 100%. We strive to do this, but for reasons I won't go into , we do not have complete coverage for every part. This isn't like winning Powerball, but we do publish the STEP model for the TPS82840B on the web page. You need to look at the "Quality & packaging" tab in each product folder to check for the existence of .bxl and .stp files. You'll find the STEP model on the page at .

Upon further inspection, I see that the web page erroneously delivers SIP0009A instead of SIP0009F. Sigh. I'm attaching the correct STEP model. I'll also look into how to get the web page corrected.

Regards,

Oliver

SIP0009F.zip

0 marc48123 over 8 years ago in reply to Oliver Landine - WEBENCH® Design Center

Prodigy 210 points

Hi Oliver

I am now also looking for the SIL0008D model fro tps82130. It doesn't list any STP model in Quality & Packaging.

Do you have it available?

Thank you

Marc

0 Oliver Landine - WEBENCH® Design Center over 8 years ago in reply to marc48123

TI__Expert 3055 points

Marc,

We're looking into why the STEP model is not showing on that web page. In the meantime, here it is.

Regards,

Oliver

SIL0008D.zip

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

Microsip STEP model (e.g. for TPS82674)