Adding a TI Part SM73302 to TINA TI

Shivg

Other Parts Discussed in Thread: TINA-TI, SM73302

Hi there, I wanted to study the stability and bandwidth of TI part SM73302 with some resistor and capacitor values. How can I add this part to TINA-TI ? I also wanted to add Hamamatsu make Photodiode S2386-45k, and 24bit ADC HX711 to Tina, help me with this.

over 8 years ago

0 Britt Brooks - Online Design Tools over 8 years ago

TI__Mastermind 41310 points

Shivank,

We do not currently have a model for the TI part (SM73302), so it cannot be added to TINA-TI.

In order to add any parts to TINA-TI, you will need a PSpice (or equivalent) model that can be made into a macro using the New Macro Wizard. Once you have the model, you can follow the instructions on the web to import the model into a macro.

The import document can be found on the TINA-TI download page.

0 Shivg over 8 years ago in reply to Britt Brooks - Online Design Tools

Prodigy 130 points

Thank You Britt, I appreciate your efforts for fast and accurate reply.

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

Adding a TI Part SM73302 to TINA TI